Squander Tire Recycling EPT for Rubber Powder
Waste tire recycling EPT is to crush waste tires into rubber powEPTin different measurements. The ultimate rubber powEPTis with purity of 99.ninety nine%, can be utilized to make rubber tiles, rubber mat, asphalt, water-proof content, filler of artificial grass.
The doing work approach of waste tire recycling crumb rubber EPT is:
waste tire—tire circle cutter—tire strip cutter—tire slice cutter—rims separator—rubber crusher—magnetic separator—fiber separator—rubber powder
Specification of waste tire recycling EPTs:
1. Tire circle cutter is utilised to reduce and open the joint of tire’s aspect and top.
Name |
Motor EPT |
Excess weight |
Capacity |
Tire specification |
Tire circle cutter |
4kw |
650kg |
40pcs/h |
650-1200mm (Equally strengthened and nylon tires) |
2. Rims separator is used to separate the steel rims about the tire to steer clear of the hurt to the EPT.
Name |
Motor EPT |
Fat |
Ability |
Rims separator |
7.5kw |
1300kg |
100pcs/h |
3. Tire strip cutter is utilised to minimize the tire cirlce into strips 5×8 cm .
Title |
Motor EPT |
Excess weight |
Ability |
Slicing size |
Tire strip cutter |
4kw |
850kg |
two.5t/h |
5x8cm |
4. Tire slice cutter is used to minimize the strips into small chunks about three.5 cubic centimeter.
Identify |
Motor EPT |
Excess weight |
Capability |
Reducing size |
Tire slice cutter |
4kw |
800kg |
.8t/h |
3x5x8cm |
five. Rubber crusher is to crush the rubber blocks into powEPTin diverse dimensions with purity of 99.99%.
Design | Capability | Drum diameter | Drum length | Front roll linear | Roll pace ratio | Max roller spacing | Motor EPT |
XKP-350 | 3ton | 300mm | 500mm | 26.2m/min | one:2.5 | 8mm | 30kw |
XKP-400 | 6ton | 400mm | 600mm | 34.5m/min | one:two.five | 8mm | 45kw |
XKP-450 | 8ton | 450mm | 760mm | 38.0m/min | one:2.5 | 8mm | 55kw/75kw |
XKP-560 | 10ton | 560mm | 800mm | 38.6m/min | one:2.5 | 8mm | 75kw/90kw |
XKP-560D | 20ton | 560mm | 1000mm | 42.5m/min | one:two.5 | 8mm | 132kw/160kw |
Rewards of our rubber crusher EPT:
1. Crusher roller velocity ratio: Ours is 1: 2.five, whilst the old type roller velocity ratio is one: 1.38.
two. Roller composition: Our two rollers are the two grooved, which boost the friction and then increase the output, while the aged sort is a single with groove, and the other is sleek.
3. Roller materials: The roller is manufactured by Welding wear resistant alloy components, 5Cr6MnMo. We can supply you three many years warranty of the roller. Whilst the aged kinds EPT use forged iron to make the rollers, extremely effortless to break or crack in two .
four. EPT feature: Our EPT is energy preserving one/3. For instance, generating 1T powder, our EPT electrical energy use is only 150 deg, whilst their electrical energy consumption is about 250- 280 deg in making 1T powder.
5. Bearing: Our EPT use rolling bearing, there are eight pieces bearing inside of, whilst the old EPT use the slide bearings ( bush) , which is not as very good as ours.